液位变送器快讯:全国可再生能源年利用量达7.3亿吨标准煤压力仪表制造厂家
液位计厂家,液位变送器厂家产品推荐
液位变送器快讯:全国可再生能源年利用量达7.3亿吨标准煤
信息来源: 液位计厂家 | 2020-04-09 点击量: 5068

中国是国际洁净能源的巨头,是世界上一大的太阳能、风力与环境科技公司的发源地。数据显示,2019年我国能源消费总量48.6亿吨标准煤,比上年增长4.7%。
China is an international clean energy giant and the birthplace of one of the world's largest solar, wind and environmental technology companies. Data shows that China's total energy consumption in 2019 is 4.86 billion tons of standard coal, an increase of 4.7% over the previous year.
中国是国际洁净能源的巨头,是世界上最大的太阳能、风力与环境科技公司的发源地。我国能源工业也称为燃料动力工业,是指对能源资源进行开发、加工和利用的生产部门,它包括煤炭、石油和电力工业三大部门。
清洁能源行业分析表示,2019年末全国发电装机容量201066万千瓦,比上年末增长5.8%。其中,火电装机容量119055万千瓦,增长4.1%;水电装机容量35640万千瓦,增长1.1%;核电装机容量4874万千瓦,增长9.1%;并网风电装机容量21005万千瓦,增长14.0%。
China is an international clean energy giant and the birthplace of the world's largest solar, wind and environmental technology companies. China's energy industry, also known as fuel power industry, refers to the production sector that develops, processes and utilizes energy resources, including three major sectors: coal, oil and power industry.//液位变送器快讯:全国可再生能源年利用量达7.3亿吨标准煤

According to the analysis of clean energy industry, by the end of 2019, the installed power generation capacity of the whole country was 2010660000kw, an increase of 5.8% over the end of last year. Among them, the installed capacity of thermal power is 119055 million kilowatts, an increase of 4.1%; the installed capacity of hydropower is 356.4 million kilowatts, an increase of 1.1%; the installed capacity of nuclear power is 48.74 million kilowatts, an increase of 9.1%; the installed capacity of grid connected wind power is 21.05 million kilowatts, an increase of 14.0%.//液位变送器快讯:全国可再生能源年利用量达7.3亿吨标准煤
能源发展“十三五”规划也指出,我国到2020年非化石能源占一次能源消费总量将超过15%。清洁能源行业发展前景指出,发改委、能源局发布的《能源生产和消费革命战略(2018-2030)》提出,到2030年,非化石能源发电占总发电量的50%,到2050年更要成为能源主体,非化石能源占一次能源总消费的50%以上,即发电占总电量的70%-80%,比起当前水平仍有很大提升空间。以上便是清洁能源行业前景分析的所有内容了。
According to the 13th five year plan for energy development, non fossil energy will account for more than 15% of the total primary energy consumption by 2020. The development prospect of clean energy industry points out that the energy production and consumption revolution strategy (2018-2030) issued by the national development and Reform Commission and the energy administration proposes that by 2030, non fossil energy power generation will account for 50% of the total power generation, and by 2050, it will become the main energy source. Non fossil energy will account for more than 50% of the total primary energy consumption, that is, power generation will account for 70% - 80% of the total power generation, which is still greatly improved compared with the current level Space. The above is all the content of clean energy industry prospect analysis.//液位变送器快讯:全国可再生能源年利用量达7.3亿吨标准煤

2088型单法兰液位计,国产液位变送器产品说明

产品简介2088型TLT型液位变送器是利用静压原理进行的液位测量,用于工业过程控制或计量液位的测量,是高性能的测量仪表,具有模拟或数字输出信号。通过液位安装法兰或其他连接方式安装,变送器可直接安装于被测罐体上,精确测量各种罐体的压力、差压和液位,它能全面满足您的液位测量需求 单法兰液位变送器具有设计原理先进、品种规格齐全、安装使用简便等特点,

具体优点如下:   
        1、单法兰液位变送器的安装很简单、使用方便,互换能力强。 
        2、适合容器内液体介质的液位、界面的测量。除现场指示,还可远传变送器、报警开关、检测功能齐全。  
        3、单法兰液位变送器具备本安防爆和隔离防爆能力,可应用于各种危险场所。   
        4、单法兰液位变送器的结构简单、安装方便、维护方便、耐腐蚀、防爆。  
        5、传感器与被测介质完全隔离,密封性好,可靠性高,使用安全。  
        6、高品质传感的灵敏度高,响应速度快,准确反映流动或静态液面的细微变化,测量准确度高。 
        7、单法兰液位变送器的测量范围大,不受贮槽高度的限制。
       
应用及选型:
是工业过程控制中最为常用的一种液位检测仪表,其广泛应用于各种自控系统,如航空航天、军工、石化、化工、油井、电力、船舶、建材、管道等众多行业。一般用在液体的液位或差压/压力的测量。
被测介质用引压管引出时,易固化或结晶;
被测介质中含有固体悬浮物或过于粘稠,容易堵塞引压管;
被测介质温度过高或有腐蚀性等,不利于直接测量;
       被测介质是食品或其他需要保持卫生条件,不能污染的介质
 
选型注意:
       用户在选型前明确被测介质的温度,腐蚀性,测量范围,用途,是否防爆,是否需要禁油处理,介质是否容易结晶或粘稠需要膜盒法兰连接等。
技术性能
使用对象:    液体、气体或蒸汽
测量范围:    见选型规格表
输出信号:        4~20mA dc.输出,叠加HART协议数字信号(两线制)
电    源:  外部供电24V dc.,电源范围12V~45V
负载特性:
 
危险场所安装:    隔爆型dIICT5;
                          本安型 iaIICT5;
迁移特性: 安装完毕,通过按键或手操器通信接口实现自动迁移。
温度范围:          
电子线路板工作在       -40~85℃;
                  敏感元件工作在  -40~104℃;
               储存温度             -40~85℃;
                  带数字显示           -25~65℃(正常运行);
                                          -40~85℃(无损坏);
相对湿度:0~95%
超压极限:传感器加2~5倍的量程不损坏,符合规定的法兰耐压等级。
阻    尼: 时间常数在0.2~32.0s之间可调。
启动时间:3s,不需预热。

 华恒仪表实现了核心技术的从无到有,不断地提高工业自动化仪表的精确度,仪表性能标准对标国际技术,完成产品迭代升级,满足用户需求的个性定制。
未来,华恒仪表将继续秉承一辈子做好一件事的“工匠华恒仪表将继续辈子做好一件事的“工匠精神”,边生产边科研,研发团队通过在各种不同环境下对仪表进行无数次的试验,不断丰富技术,完善产品性能,将工业自动化仪表做成推动我国工业发展的经济耐用产品,成为国内仪表行业引领者。


未来的压力变送器行业肯定是越做越精,一些品牌企业会不断的提升产品的竞争力,完善配套措施的服务,同时会加速开发变送器的附加值产品,丰富产品系列,不再只做某一项的单一产品,增加技能型的功效延伸,方便客户的日常使用,带动整个行业技术标准质的飞跃,使得压力变送器真正进入科技化发展方向。


扫一扫.厂家定制电话,